E-Tech DrivE-Tech 015 Installing And Operating Manual page 11

Wall mounting kit
In this application DrivE-Tech is cooled independently by its auxiliary cooling fan integrated in the radiator.
Wall-mounted kit is composed of:
DrivE-Tech 015,030,022,040

n.° 1 auxiliary fan 230V AC (DrivE-Tech
015,030) or 12 VDC (DrivE-Tech 022,040)

n.° 4 screws to fix cooling fan

n.° 1 protection grill

n.° 1 metal bracket in AISI 304

n.° 4 screws to fix DrivE-Tech to wall bracket
Make sure the manufacturer that the electric motor is suited for operation in the inverter
Make sure to properly attach the grid of the auxiliary cooling fan.
Make sure to remove the auxiliary cooling fan if DrivE-Tech is coupled to a motor. Failure to do so
creates a high risk of overheating the motor and DrivE-Tech unit.
DrivE-Tech 055,075,110

n.° 2 12 V DC fans.

n.° 1 fans cover.

n.° 2 fans cover fixing screws

n.° 2 wall fixing brackets

n.° 4 M5 screws for DrivE-Tech fixing to the brackets

n.°1 holes reference sheet
11