Programming Cellular Phone Number Remotely - DATEREMOTE CDS-9020 Manual

************** CONFIGURATION MENU **************
A. Set Receive Window 1 00:00 to 00:00
B. Set Receive Window 2 00:00 to 00:00
C. Set Receive Window 3 00:00 to 00:00
D. Set Receive Window 4 00:00 to 00:00
E. Set Time:
F. Exit to Terminal Mode
G. Reprogram Telephone Information
H. Display Signal Strength
I. Remote Comms Baud Rate: 9600
J. Program Alarm Number:
K. Modem Init: at+ms=10,0,9600,14400
L. Site Name: Dataremote
M. Auto Answer mode: ON
ESN: 17909310176
Phone #: 8053399736 System ID:
Select Option: A
Window 1 Start time is: 00:00
Enter NEW time in MILITARY time (HH:MM): 23:59 (Midnight turns on)
Window 1 Stop Time is: 00:00
Enter NEW time in MILITARY time (HH:MM): 11:00 (11:00am unit turns off)
************** CONFIGURATION MENU **************
A. Set Receive Window 1 23:59 to 11:00
B. Set Receive Window 2 00:00 to 00:00
C. Set Receive Window 3 00:00 to 00:00
D. Set Receive Window 4 00:00 to 00:00
E. Set Time:
F. Exit to Terminal Mode
G. Reprogram Telephone Information
H. Display Signal Strength
I. Remote Comms Baud Rate: 9600
J. Program Alarm Number:
K. Modem Init: at+ms=10,0,9600,14400
L. Site Name: Dataremote
M. Auto Answer mode: ON
ESN: 17909310176
Phone #: 8053399736 System ID:
When you use this programming option remotely you need to be very cautious. Sometimes the site can be
100's of miles from your location and if you set this option wrong you will have to send someone out to the site.
Get into the Configuration Menu (Remotely or Locally)
Press the letter G
Follow the Prompts
17:08:21
Battery voltage: 12.0
2
17:09:38
Battery voltage: 11.2
2

Programming Cellular Phone Number Remotely

17