Mitsubishi PUHZ-SHW80YAA Service Manual page 64

OPERATING PROCEDURE
11. Removing the 4-way valve, LEV (LEV-A, LEV-B, LEV-C
high pressure switch, low pressure switch and high pres-
sure sensor.
Note 1: Recover refrigerant without spreading it in the air.
Note 2: When installing the following parts, cover it with
a wet cloth to prevent it from heating as the tem-
perature below, then braze the pipes so that the
inside of pipes are not oxidized;
* For SHW·model only
1
12. Removing the compressor (MC)
·
Note 1: Recover refrigerant without spreading it in the air.
2: Tighten the nuts of compressor with a torque of
4 ± 0.4 N·m.
* For SHW·model only
1
OCH651
(*1)
), Photo 11 (SHW model)
Photo 12
·
PHOTOS