Mitsubishi PUHZ-SHW80YAA Service Manual page 63

OPERATING PROCEDURE
9. Removing the thermistor <Discharge> (TH4), thermistor
<Suction> (TH32) (*1) and thermistor <Comp. Surface> (TH33)
* For SHW·model only
1
10. Removing the 4-way valve coil (21S4), LEV coil (LEV-A,
LEV-B, LEV-C (*1) ), lead wire for high pressure switch, low
pressure switch, and high pressure sensor.
Note1 : For SHW model, please see Photo 11.
* For SHW·model only
1
OCH651
PHOTOS
Photo 9-1
Photo 9-2
Photo 10 (SW100 model)