Network Setting (Wireless) - Samsung RM49H User Manual

Network Setting (Wireless)

Connecting to a Wireless Network
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the
video may not play smoothly.
― Select a channel for the wireless IP sharer that is not currently being used. If the channel set
for the wireless IP sharer is currently being used by another device nearby, this will result in
interference and communication failure.
― Your product supports only the following wireless network security protocols.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is
set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products
will not support a connection in compliance with new Wi-Fi certification specifications.
― If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network
via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will
automatically configure the SSID and WPA key in either mode.
― Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup,
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the
network to transmit an encrypted security code called an Access or
Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for your wireless network. If you use this
method of setting up the network connection, and have a
you will have to enter the Pass Phrase during the the automatic or manual setup process.
How to set up automatically
1
Go to MENU m →
2
The Network
list of the available networks.
3
In the list of networks, press the ▲ or ▼ button to select a network, and then press the E
button twice.
― If the desired wireless router does not appear, select
― If the router cannot be found after retrying, select the
The Add Network
4
If the
does not have security, go to step 7.
5
If the router has security, enter the
WPS(PBC)
Network → Network Settings.
function searches for available wireless networks. When done, it displays a
button appears.
Enter security key. screen appears, go to step 5. If you select a wireless router that
Enter security key.
Security Key. The Security
Security Key for your wireless network,
Refresh to search again.
Stop button.
(Security key or PIN).
78