Samsung RM49H User Manual page 124

Other issue
Small particles are found on the edges of the product.
The PIP menu is not available.
When I try to change the PC resolution, a message
defined resolution is not supported." appears.
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
There is no sound in HDMI mode.
The particles are part of the product design. The product is not defective.
The menu is enabled or disabled depending on the
"The The message "The defined resolution is not
exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
DVI cables do not transmit sound data.
Make sure to connect the audio cable to the correct input jack to enable audio.
This function is available only when a source device, such as a DVD player and STB, is
connected to the product via an HDMI (RGB signal) cable.
Displayed picture colours may not look normal. Video or sound may not be available. This can
occur if a source device that only supports an older version of the HDMI standard is connected
to the product.
If such a problem occurs, ask the manufacturer of the external device about the HDMI version
and, if out of date, request an upgrade.
Some PC graphics cards may not automatically recognise HDMI signals that do not include
sound. In this case, manually select a sound input.
Source mode.
supported." appears if the input source resolution
124