Advice For The Installer; Installation - Kenwood KH600B-IND Instructions For Use Manual

Touch control induction cooking hobs
Table of Contents

Advertisement

4 - INSTALLATION

CAUTION:
This appliance must be installed in accordance with these installation instructions.
This appliance shall only be serviced by authorised personnel.
This appliance is to be installed only by an authorised person in compliance
with the current electrical regulations and in observation of the instructions
supplied by the manufacturer.
Failure to comply with this condition will render the guarantee invalid.

Incorrect installation, for which the manufacturer accepts no responsibility, may
cause personal injury of damage.
Always disconnect the appliance from mains power supply before carrying out
any maintenance operations or repairs.
WARNING !
We would point out that the adhesive which bonds the plastic laminate to the furniture
must withstand temperatures not less than 150 °C to avoid delamination .
The appliance must be housed in heat resistant units .
The walls of the units must be capable of resisting temperatures of 75 °C above room
temperature .
A
57 mm
bottom of cooktop
(1): at least 50 mm between the back
side of the cut-out and the back
of the countertop .
26
Advice for
the installer
from the top of
countertop to
A
Fig. 4.1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents