Kenwood KH600B-IND Instructions For Use Manual page 24

ERROR CODE ON THE DISPLAY/S
If an error message appears on the
display/s (the display/s show/s "
another character alternating - e .g . "
A F 0
" ", " " and " ", . . . . .) :
1 . Disconnect the cooktop from the
mains .
2 . Reconnect the cooktop and turn it on .
3 . Wait for about two minutes and if the
problem does not appear the cooktop
can be used .
4 . If the problem does not disappear
repeat step from 1 to 3 .
5 . If the problem continues, disconnect
the cooktop from the mains and contact
your Authorised Service Centre .
Important: In the case of error message
F L F
" " and " ", "
see notes at pages 9, 10 .
DISPLAY/S
CORRECTLY OPERATING
If a display or the displays are only
partially lit or not lit.
1 . Switch off the cooktop and disconnect
it from the mains .
2 . Reconnect the cooktop and turn it on .
3 . Wait for about two minutes and if the
problem does not appear the cooktop
can be used .
4 . If the problem does not disappear
repeat step from 1 to 3 .
5 . If the problem continues, disconnect
the cooktop from the mains and contact
your Authorised Service Centre .
24
F
C F
" and " " or " " and " "
OFF OR
" and
F
" and
NOT