Factory Default Settings; Technical And Environmental Specifications - NETGEAR EX3110 User Manual

Factory Default Settings

To reset the extender to factory default settings, you can use the Reset button on the side panel or you can
log in and click the onscreen RESET button. For more information, see
Default Settings on page 33.
The following table shows the factory default settings.
Table 2. Factory default settings
Feature
Smart Setup
WiFi communication
WiFi network name (SSID)
Security
Transmission speed
Country/region
Operating mode
Data rate in the 2.4 GHz band
Data rate in the 5 GHz band
DHCP
1
Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual data
throughput rate.

Technical and Environmental Specifications

The following table shows the technical and environmental specifications.
Table 3. Technical specifications
Technical Specifications
Network protocol and
standards compatibility
Physical specifications
AC750 WiFi Range Extender
Default Settings
Enabled
Enabled
NETGEAR_EXT
Disabled
1
Auto
Varies by region
802.11a/b/g/n/ac
54/145/300 Mbps
54/145/300/433 Mbps
Client enabled
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay,
• Dimensions: 72.5 x 72.5 x 64.8 mm (2.85 x 2.85 x 2.55 in.)
• Weight: 152 g (0.34 lb)
Factory Settings and Technical Specifications
Return the Extender To Its Factory
42