Install The Wifi Extender; Place The Extender And Apply Power; Connect To An Existing Wifi Network; Connect With Wps - NETGEAR EX3110 User Manual

Ac750 wifi range extender
Hide thumbs Also See for EX3110:
Table of Contents

Advertisement

Install the WiFi Extender

Place the extender, apply power, and connect the extender to your WiFi network.

Place the Extender and Apply Power

To place the extender and apply power:
1.
Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
2.
Plug the extender into an electrical outlet.
3.
Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button on the side of the extender.

Connect to an Existing WiFi Network

To extend the range of your WiFi network, you must connect the extender to your existing WiFi network.
You can do this in one of two ways:
Connect with WPS. For more information, see
Connect with web browser setup. For more information, see
Assistant
on page 11.

Connect with WPS

Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and
password. For help with the WPS button on your WPS-enabled device, check the instructions or online help
that came with that device. Some older equipment cannot use WPS.
Note
WPS does not support WEP network security or a hidden SSID network. If your
existing WiFi network uses WEP security or its SSID is hidden, follow the instructions
in
Connect with the NETGEAR Installation Assistant
To use WPS to connect the extender to your WiFi router:
1.
Press the WPS button on the extender.
The WPS LED blinks.
2.
Within two minutes, press the WPS button on your router or access point.
When the extender connects to your existing WiFi network, the WPS LED on the extender lights solid
green and the Router LED lights.
If the Router Link LED does not light, try again. If it still does not light, see
Installation Assistant
3.
If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender to the 5 GHz
band.
AC750 WiFi Range Extender
on page 11.
Get Started
Connect with WPS
on page 10.
Connect with the NETGEAR Installation
on page 11.
10
Connect with the NETGEAR

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents