Memory Seats; To Set A Memory Position; To Program A Key Fob To The Memory Position - Jeep Grand Cherokee 2018 Quick Reference Manual

SEATS

Memory Seats

The memory seat feature allows you to set two
different driver's seating positions (excluding
lumbar position), outside mirrors, radio station
preset settings and tilt/telescoping steering col-
umn positions (if equipped). The memory seat
buttons are located on the driver's door panel.
Memory Seat Buttons

To Set A Memory Position:

1. Cycle the vehicle's ignition to the ON/RUN
position (Do not start the engine).
2. Adjust all memory profile settings.
3. Push and release the S (set) button.
4. Push and release the 1 or 2 button within
five seconds.

To Program A Key Fob To The Memory Position:

1. Cycle the vehicle's ignition to the OFF posi-
tion.
2. Select the desired memory profile, 1 or 2.
3. Push and release the S (set) button on the
memory switch, then within five seconds,
press and release the 1 or 2 button accord-
ingly.
4. Push and release the lock button on the key
fob within 10 seconds.
NOTE:
Memory seats can be programmed/stored while
the engine is running.
For further information, and applicable warn-
ings and cautions, please refer to the Owner's
Manual at www.mopar.com/en-us/care/
owners-manual.html (U.S.
www.owners.mopar.ca (Canadian Residents).
Residents) or