Panasonic BB-HGW700A Operating Instructions Manual page 15

2.1.4 Camera Portal
This product has an inbuilt web server function. Camera Portal allows you to list up to 16 cameras
names and their still images.
Viewing Camera Images from the LAN (Home) Side
It is possible to view camera images by accessing the camera portal.
1.
Start the web browser.
2.
Enter "http://bbhgw.webpage:"port
number"" into the web browser's address bar.
(The factory default port number is 80. If the
port number is 80 there is no need to enter it.)
• The camera portal is displayed.
• By clicking on the still image, a single
moving image can be displayed.
Notes
• If a key mark is displayed, click on it and
enter that camera's user name and
password.
(If camera authentication has been set up,
the key mark will be displayed.)
• If a blue unmarked window is displayed,
click [Refresh Camera].
Sometimes a blue unmarked window is
displayed when the camera's
authentication setup cannot be verified or
the IP address and port number overlap.
Check the camera's settings.
• If an exclamation mark is displayed, click on
it and the camera's original password
window is displayed.
(It is displayed when a newly purchased
camera is connected.)
• If the camera and this product are
disconnected while sending or receiving
data, a key mark (when camera
authentication is setup) or a blue unmarked
window is displayed. In this case, after
checking that the camera's power supply
and connections are correctly inserted,
click [Refresh Camera]
[For assistance, please call: 1-800-272-7033]
Operating Instructions
15