Panasonic BB-HGW700A Operating Instructions Manual page 13

8 Wireless:
9 Viewnetcam.com:
Advanced Setup
10 Address Translation:
11 Security:
12 Option:
13 VPN (PPTP):
Maintenance
14 Password:
15 Update Firmware*:
16 Save Settings:
17 Restart:
18 Factory Default:
PPPoE Connection:
19
20 Ping:
Information
21 Status:
22 Log:
Support:
23
24 Help:
* To download the latest version of the firmware from Panasonic's support website, it is necessary
to connect to the Internet.
Sets up wireless LAN motion mode and wireless security. (see page
37)
Sets up Viewnetcam.com. (see page 44)
Translates both the global address on the WAN side (Internet) and
private address on the LAN side, and also performs setup to access
this product's network from an Internet terminal. (see page 46)
Allows you to set up filtering, and control access to this product at
the touch of a button, and automatically saves a log. (see page 52)
Sets up access on the LAN side, and also connection to the Internet.
(see page 58)
This product allows you to create a VPN (Virtual Private Network)
using PPTP (Point-to-Point Tunneling Protocol). A VPN is private
network that is as safe as an exclusive line and travels through the
Internet. Using this function, camera images from PCs in far away
places can be viewed safely. (see page 65)
Modifies the user name and password to access the setup page.
(see page 67)
Updates to the latest version of firmware. (see page 68)
Saves and loads settings. (see page 70)
Restarts this product. (see page 71)
Initializes this product. The settings are returned to the preset factory
default. (see pages 71 and 81)
Manually starts or stops the PPPoE connection to the ISP. (see page
72)
Checks that each device with an IP address is connected. (see page
73)
Displays information such as connection status. (see page 74)
Displays filtering log, UPnP™ log (general), UPnP™ log (CP),
connect/disconnect log, Viewnetcam.com log, and VPN (PPTP) log.
(see page 77)
Product and support information can be found on the Internet. (see
page 80)
Explains about commands and functions on the setup pages. (see
page 80)
[For assistance, please call: 1-800-272-7033]
Operating Instructions
13