Front - Sony Ericsson W810 Working Instruction, Mechanical

Working Instruction, Mechanical

4.1.5 Front

M !
AKE SURE THE KEYBOARD IS IN ITS PROPER POSITION
Place the front at the top over the frame and press it
forward until it snaps onto the top of the frame.
Press like this to snap the front and frame together.
Check that there are no gaps along the sides!
If this is the case, gently press the two halves together with
your fingers!
Apply 18 Ncm torque to tighten two new screws using the
T6 bit.
3/000 21-1/FEA 209 544/108 B 50(53)
©
Sony Ericsson Mobile Communications AB