Table of Contents
Advertisement
4.2.2 Network Screen
The Network screen provides detailed information about your powerline network. The text list
box shows all PowerPacket™ devices found on your powerline network identified by their
MAC addresses. The second column indicates their data rate measurements in Mbps. Press
Scan Powerline Network button to refresh the listed information.
In case a PowerPacket™ device in your network is not listed in the screen above, make sure
that its network password has not been made private previously with a different password than
your current private network password. You can always reset a PowerPacket™ network
password to the universal one by running the PowerPacket™ Configuration Utility on the PC
attached to this device and use "HomePlug" as the network password.
11
Advertisement
Table of Contents
