Events - Axis M1065-LW User Manual

AXIS M1065-LW Network Camera
Setup
Image without WDR.
Image with WDR.
Note
If you use WDR, you may experience some WDR artifacts in the image.
Find out more about WDR and how to use it at axis.com/web-articles/wdr

Events

About events
The event pages allow you to configure your product to perform actions when different events occur. For example, the product
can start a recording or send an email notification when motion is detected. The set of conditions that defines how and when
the action is triggered is called an action rule.
How to use PIR and audio to deter intruders
This example explains how to set up the camera to play an audio clip with a barking dog when the PIR sensor detects movement
outside office hours.
Create an action rule:
1. Go to Settings > System > Events and add an action rule.
2. Type a name for the action rule.
3. From the list of triggers, select Detectors and then select PIR.
4. Set the schedule to After hours.
5. From the list of actions, select Play audio clip.
6. From the list of audio clips, select Dog barking.
7