Axis M1065-LW User Manual page 10

AXIS M1065-LW Network Camera
Setup
6. Select the CA certificate and the client certificate to use for wireless authentication.
7. Click Save.
About EAP-PEAP/MSCHAPv2
The authentication protocol EAP-PEAP/MSCHAPv2 (Extensible Authentication Protocol - Protected Extensible Authentication
Protocol/Microsoft Challenge Handshake Authentication Protocol) allows the client to authenticate the network using a digital
certificate provided by a Certification Authority. The network authenticates the client using an identity and a password. To gain
access to the protected network, the Axis product presents its identity and password to the network access point. If these credentials
are approved, the access point allows access on a preconfigured port.
Important
To ensure successful certificate validation, time synchronization should be performed on all clients and servers prior to
configuration.
How to configure the wireless settings using WPA
1. Go to Settings > System > Wireless
2. In the list, select the wireless network.
3. Under WPA-Enterprise protocol, select EAP-PEAP/MSCHAPv2.
4. Enter the user Identity associated with your certificate.
5. Enter the Password for your user identity.
6. Select the PEAP Version (0 or 1) as used in the access point.
7. Select the PEAP Label that the access point uses when using PEAP version 1. Select 1 to use client EAP encryption; select
2 to use client PEAP encryption.
8. Select the EAPOL version (1 or 2) as used in the access point.
9. Select the CA certificate with which to validate the network/AP certificate.
10. Click Save.
About wireless certificates
Wireless network certificates are used to authenticate devices on a wireless network. Wireless networks using the
TM
WPA -/WPA2-Enterprise security method are protected by EAPOL (Extensible Authentication Protocol Over Lan), which is part of
the IEEE 802.1X standard. The client authenticates the server using digital certificates. The server authenticates the client using
digital certificates or a password depending on the selected WPA-Enterprise type.
TM
-/WPA2-Enterprise and EAP-PEAP/MSCHAPv2
10