Linksys WRVS4400N Manual page 71

Edit IP ACL Rule
This Web page can be entered only through IP Based ACL Tab. You can enter this page
by clicking Add New Rule button on that page.
New Rule
Action: Select either Allow or Deny. Default is Allow.
Service: Select ALL or pre-defined (or user-defined) services from the drop-down menu.
Log Select this option to log all traffic that is filtered by this rule.
Log Prefix: This string will be attached in front of the log for the matched event.
Source Interface: Select LAN, WAN, or ANY interface.
Source: To apply the rule to one source IP address, select Single from the drop-down
menu, then enter the address in the field. To apply the rule to all source IP addresses,
select ANY from the drop-down menu. To apply the rule to a range of IP addresses, select
Range and enter the starting and ending IP addresses. To apply the rule to a subnet, select
Net and enter the IP address and subnet mask.
Destination: To apply the rule to one destination IP address, select Single from the
drop-down menu, then enter the address in the field. To apply the rule to all destination IP
addresses, select ANY from the drop-down menu. To apply the rule to a range of IP
addresses, select Range and enter the starting and ending IP addresses. To apply the rule
to a subnet, select Net and enter the IP address and subnet mask.
Service Management Button: Click this button and the Service Tab to add new service
type to the Service drop-down menu.
Scheduling
Time: To make the rule apply for an entire day, select Every time. To make the rule
apply only during a specific period of the day, enter the starting time in the From field
and the ending time in the To field.
Date: To make the rule apply on a daily basis, select Everyday. To make the rule apply
on specific days of the week only, select the desired days.