Chapter 4 : Getting To Know The Router; The Front Panel - Linksys WRVS4400N Manual

Wireless-n gigabit security router with vpn
Hide thumbs Also See for WRVS4400N:
Table of Contents

Advertisement

Chapter 4: Getting to Know the

The Front Panel

The Router's LEDs are located on the front panel of the Router.
LEDs
POWER
IPS
WIRELESS
1-4 (ETHERNET)
Router
Green. The POWER LED lights up when the Router is powered on. The LED
flashes when the Router runs a diagnostic test.
Green/Red. The IPS LED lights up when the IPS function is enabled. The LED
light is off when the IPS functions are disabled. The IPS LED flashes green when
an external attack is detected. The IPS LED flashes red when an internal attack is
detected.
Green. The WIRELESS LED lights up when the wireless module is enabled. The
LED is off when the wireless module is disabled. The WIRELESS LED flashes
green when the data is transmitting or receiving on the wireless module.
Green. For each port, there are three LEDs. If the corresponding LED is
continuously lit, the Router is connected to a device at the speed indicated through
the corresponding port (1, 2, 3, or 4). The LED flashes when the Router is actively

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Linksys wrvs4400nLinksys wrvs4400nv2

Table of Contents