Linksys WRVS4400N Manual page 39

Heart Beat Signal
Heart Beat Signal is a service used in Australia. Check with your ISP for the necessary setup
information.
User Name and Password. Enter the User Name and Password provided by your ISP.
Heart Beat Server. Enter the IP address of the Heart Beat server.
Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection
after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has
been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish
your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on
Demand, click the Connect on Demand option and enter the number of minutes you want to have
elapsed before your Internet connection terminates in the Max Idle Time field. Use this option to
minimize your DSL connection time if it is charged based on time. This option is disabled by default.
Keep Alive Redial period. If you select this option, the Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically re-establish your connection.
To use this option, click the option next to Keep Alive. In the Redial Period field, you specify how
often you want the Router to check the Internet connection. This option is enabled by default and the
default Redial Period is 30 seconds. Use this option to minimize your Internet connection response
time since it will always be connected.