Linksys Wireless-N Gigabit Security Router with VPN WRVS4400N Quick Installation Manual

Wireless-N
Gigabit Security
Router with VPN
Package Contents
• User Guide and QuickVPN Client
Software on CD-ROM
• Network Cable
• Power Adapter
• Stands
• Registration Card
QUICK INSTALLATION
BUSINESS SERIES
Model No. WRVS4400N Model No. Wireless
Model No.
1
Connect the Router
A
Before you begin, make sure
For details on placement
NOTE:
that you have the setup
options such as using the
information for your specific
stands or wall-mounting,
type of Internet connection.
please refer to the User Guide
The installation technician
on the CD-ROM.
from your ISP should have left
this information with you after
installing your broadband
connection. If not, you can call
your ISP to request the
settings.
B
Make sure that all of your
network's hardware is
powered off, including the
Router, PCs, and cable or DSL
modem.
C
Connect one end of an
Ethernet network cable to one
C
of the LAN ports (labeled 1-4)
on the back of the Router, and
the other end to an Ethernet
port on a PC.
D
Repeat step C to connect
more PCs, a switch, or other
network devices to the Router.
E
Connect a different Ethernet
network cable from your
cable or DSL modem to the
Internet port on the Router's
back panel.
E
F
Power on the cable or DSL
modem.
G
Connect the power adapter to
the Router's Power port, and
then plug the other end into
an electrical outlet.
H
The Power and Internet LEDs
on the front panel will light up
green as soon as the power
adapter is connected
properly.
G
I
Power on the PCs.
J
The Router's hardware
installation is now complete.
NOTE: Before setting up the
Router, make sure your PCs are
configured to obtain an IP (or
TCP/IP) address automatically
from the Router.
2
Configure the Router
These instructions will show you
how to configure the Router. You
only need to configure the Router
once using any computer you have
set up.
A
Open your web browser. Enter
http://192.168.1.1 in its
Address field. Press the Enter
A
key.
B
A password request screen
will appear. Enter the default
user name and password,
admin, in lowercase letters in
the User Name and Password
fields. (For added security, you
should later set a new
password, using the
Administration tab's
B
Management screen of the
web-based utility). Click the
OK button.
C
The web-based utility will
appear with the Setup tab and
IP Versions selected. Click on
the WAN option under the
Setup tab.
C
D
If requested by your ISP
(usually cable ISPs), complete
the Host Name and Domain
Name fields, and the MTU and
MTU Size fields. Otherwise,
leave the defaults.