Class Of Service Configuration - Planet FGSW-1820CS User Manual

4.6.2 Class of Service Configuration

This section introduces detail information of Class of Service Configuration of Web Smart Switch; the screen in
appears and Table 4-18 descriptions the Class of Service Configuration of Web Smart Switch.
Object
Enable High Priority
Allow to disable or enable the High Priority function. Default mode is Enable.
Port
Indicate port 1 to port 26 (FGSW-2620CS), port 1 to port 18 (FGSW-1820CS).
Port Base
Define per port Class of Service policy based on Port Base policy.
VLAN Tag
Define per port Class of Service policy based on VLAN Tag priority policy.
IP /DS
Define per port Class of Service policy based on IP / DS policy.
Apply
Press this button for save current configuration of Web Smart Switch.
Table 4-18 Descriptions of the Class of Service Configuration Screen Objects
VLAN Priority tag value define
High Priority
Low Priority
Figure 4-46 Class of Service Configuration Web Page Screen
IEEE 802.1p priority value from VLAN tag
User priority values= 4~7
User priority values= 0~3
Description
Figure 4-46
- 53 -