Planet FGSW-1820CS User Manual page 29

Object
Port
Speed Mode
Flow Control
State
Port Description
Apply button
Table 4-3 Descriptions of the Port Configuration Web Page Screen Objects
Object
Port
Current Status
Link
Speed Mode
Flow Control
Setting Status
Speed Mode
Flow Control
State
Port Description
Refresh button
Table 4-4 Descriptions of the Port Configuration Web Page Screen Objects
Allow choosing all or one port of Web Smart Switch for further management, the available
options is All & 01 to 26 (FGSW-2620CS). Or All & 01 to 18 (FGSW-1820CS).
Allow choosing various speed duplex mode from one specific port of Web Smart Switch,
the available options are shown as below:
Auto Negotiation
1000Full(1000Mbps Port Only)
100Full
100Half
10Full
10Half
Default mode is Auto Negotiation.
Allow to configure Flow control function of each port from Web Smart Switch, the available
options are Enable and Disable. Default mode is Enable.
Allow disable or enable one specific port from Web Smart Switch, the available options are
Enable and Disable. Default mode is Enable.
Allow input per Port Description of Web Smart Switch, up to maximum 8 characters allow.
Press "Apply" button for save current configuration of each port on Web Smart Switch.
Indicate port 1 to port 26 (FGSW-2620CS), port 1 to port 18 (FGSW-1820CS).
Display per port Current Status, such as Link, Speed Mode and Flow Control.
Display current link status from each port of the Web Smart Switch.
Display current speed mode from each port of the Web Smart Switch.
Display current flow control status from each port of the Web Smart Switch.
Display per port Current Setting Status, such as Speed Mode, Flow Control, State and Port
Description.
Display per port Speed Mode setting value.
Display per port Flow Control setting value.
Display per port State setting value.
Display per Port Description.
Press "Refresh" button to refresh current status.
Description
Description
- 29 -