Switching On/Off; Clear; Message Codes; Permanent / Minimum-Maximum Measuring - Leica DISTO S910 Manual

Operations

Switching ON/OFF

ON OFF
2 sec
Device is turned
OFF.

Permanent / Minimum-Maximum measuring

1 2
2 sec
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values)

Add / Subtract

1 2
The next meas-
urement is added
7.332 m
to the previous
one.
Leica DISTO TM S910 805080

Clear

1x
If no key is
pressed for 180
sec, the device
switches off au-
tomatically.
Undo last action.
The minimum and maximum dis-
tance measured is displayed (min,
min.
max.
max.). The last value measured is
displayed in the main line.
2x
3
The next meas-
7.332 m
urement is sub-
tracted from the 12.847 m
previous one.

Message Codes

2x
If the info icon appears with a
number, observe the instructions in
section "Message Codes".
Example:
Leave actual func-
tion, go to default
operation mode.
3
Stops permanent / minimum-
maximum measuring.
8.532 m
This process can be repeated as
required. The same process can
be used for adding or subtracting
4
areas or volumes.
20.179 m
EN
8