Table of Contents
Advertisement
4
Bundling the Cables
You can store the cables in the back of the TV.
1
Remove the rear cover (KLV-HG26M1
only).
Hold the lower right (or left) corner of the
rear cover and pull it towards you. In the
same way, detach the other corner. Let go of
the corners (detached) and hold the middle
of the rear cover, and then remove it from
the TV.
2
Bundle the cables and secure them with the
clips on both sides of the TV.
3
Put the cables from both sides together and
secure them with the clip at the bottom.
• It may not be possible to fasten
cables that are too thick with the
clips.
• If all the cables cannot be stored
inside, leave some of them hanging
down on both sides of the TV.
If the cables are not neatly stored in the
grooves, you may not be able to attach
the rear cover.
Quick Start Guide
Clips
Clip
(continued)
7
Advertisement
Table of Contents
