Sony WEGA KLV-HG26M1 Quick Start Manual page 29

Bundling the cables
You can store the cables in the back of the TV.
1
Remove the rear cover (KLV-HG26M1 only).
Hold the lower right (or left) corner of the rear
cover and pull it towards you. In the same way,
detach the other corner. Let go of the corners
(detached) and hold the middle of the rear cover,
and then remove it from the TV.
2
Bundle the cables and secure them with the clips
on both sides of the TV.
3
Put the cables from both sides together and secure
them with the clip at the bottom.
• It may not be possible to fasten cables
that are too thick with the clips.
• If all the cables cannot be stored inside,
leave some of them hanging down on
both sides of the TV.
If the cables are not neatly stored in the
grooves, you may not be able to attach the
rear cover.
Clips
Clip
27
Installation