7. Using 2 cable ties, fasten the water inlet hose to the drain hose so that the hoses
will stay in place.
IMPORTANT: Place the extra hose length (slack) inside the sink to avoid strain
and possible damage to the water faucet.
STEP 8 - COMPLETE INSTALLATION
1. Plug the washer into a grounded 3 prong outlet.
2. Check that water faucet is turned on.
3. Dispose of/recycle all packaging materials.
4. Run a normal wash cycle using detergent to test and
clean the washer. See the "Operating Instructions"
section.
16
Water Inlet
Hose
Cable Ties
Drain Hose
Water Inlet
Hose