Vimtag CM1 User Manual page 43

CM1 USER MANUAL
feature. Based on 802.11i, WPA2 replaces TKIP with Advanced
Encryption Standard (AES) instead of TKIP.
User authentication through EAP gets missed in WEP.WEP is easily to be
sniffed or stolen for it accesses wireless network trough computer MAC
address. EAP is built on a more secure public key encryption system to
ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a pass phrase or key to authenticate your wireless
connection. Key is an alpha-numeric password between 8 and 63 characters
long. Password can include symbols and spaces. This key must be the same
with your wireless router key or access point key.
After camera installation as the Quick Installation guides, you can use the
assigned IP address of the camera. Because you share the same network with
one or more computers trough a router, the assigned IP address is a local
address. Then you can view your camera in local network.
41