Camera Alarm Arming Settings - Vimtag CM1 User Manual

CM1 USER MANUAL

5.8 Camera alarm arming settings:

I / O Alarm input: When normally open, alarm input port connect with an external
alarm sensor (such as door sensor, infrared, smoke alarm detector, etc.) must be
a normally open alarm probes. When alarm occurs, the probe switch is closed;
network cameras generate alarm triggers, alarm calls according to user settings.
I / O Alarm output: When normally open, alarm output port corresponding
external alarm devices (such as alarm loudspeakers, sound and light alarm
equipment, etc.) must be a normally open type, when an event has occurred, the
user sets the Alarm I / O port output , camera alarm output switch is closed,
trigger external alarm devices.
Sensitivity: To set the sensitivity of motion detection, the greater the value the
higher the sensitivity, relatively the probability of false alarms generated will be
Adjust the
sensitivity
Apply
25