Table of Contents
Advertisement
ADE-4300/ADW-4300 User Guide
Data - Routing Screen
RIP
RIP Direction
RIP Version
Static Routing
Static Routing
Table Entries
Buttons
Add
Edit
Delete
Save
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to the
ADE-4300/ADW-4300, so that they can be forwarded to the external LAN, WAN, or
Internet. To achieve this, the local LAN must be configured to use the ADE-
4300/ADW-4300 as the Default Route or Default Gateway.
Local Router
The local router is the Router installed on the same LAN segment as the ADE-
4300/ADW-4300. This router requires that the Default Route is the ADE-4300/ADW-
Figure 72: Routing Screen
Select the desired RIP Direction.
Choose the RIP Version for the Server.
This list shows all entries in the Routing Table.
·
This area shows details of the selected item in the list.
·
Change any the properties as required, then click the "Edit"
button to save the changes to the selected entry.
Add a new entry to the Static Routing table, using the data
shown in the "Properties" area on screen. The entry selected in
the list is ignored, and has no effect.
Update the current Static Routing Table entry, using the data
shown in the table area on screen.
Delete the current Static Routing Table entry.
Save the RIP setting. This has no effect on the Static Routing
Table.
102
Advertisement
Table of Contents
