Final Assembly - SolarEdge 2.2KW User Manual

3. Insert wires according to polarities indicated on terminal block and tighten the terminal screws.
WARNING:
Be sure that AC power source is disconnected before attempting to hardwire it to the unit.
4. Make sure the wires are securely connected.
If sunlight is not sufficient or the weather is raining or cloudy, please be sure to manually switch AC input power
source to utility or backup AC power source (generator) to guarantee water pump running all the time.
CAUTION: Important
Only one input power source is connected to the inverter anytime. Otherwise, it will cause inverter damage or
human injury.

Final Assembly

After connecting all wirings, please put bottom cover back by screwing two screws as shown below.
9