Removing The Rear Cover; Removing The Tuner Board; See Fig. - JVC UX-P55 Service Manual

2.1.2 Removing the rear cover

(See Fig.3)

• Prior to performing the following procedure, remove the metal
cover.
(1) Remove the two screws C on the back of the body.

2.1.3 Removing the tuner board

(See Fig.4, 5)
• Prior to performing the following procedure, remove the metal
cover.
(1) Disconnect the card wire from connector CN1 on the tuner
board.
(2) Remove the screw D on the right side of the body.
(3) Remove the two screws E on the rear panel.
(4) Remove the band bundling the wire and pull out the wire
through the hole of the CD-R board.
CD-R board
D
Band
CN 1
Tuner board
Fig.4
C
Rear panel
Fig.3
E
Rear panel
Fig.5
C
Rear cover
Rear cover
(No.22036)1-7