Removing The Headphone Board; Removing The Cassette Mechanism Assembly; Removing The Led Board - JVC UX-P55 Service Manual

2.1.14 Removing the headphone board

(See Fig.29)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the screw P on the back of the front panel.
(2) If necessary, remove the band bundling the wire extending
from the headphone board and the display board.

2.1.15 Removing the cassette mechanism assembly

(See Fig.29, 30)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Press the EJCT button on the front panel to open the cas-
sette door.
(2) Remove the four screws Q on the back of the front panel.

2.1.16 Removing the LED board

(See Fig.30 ~ 32)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Press the EJCT button on the front panel to open the cas-
sette door.
(2) Remove the cassette holder in the direction of the arrow.
(3) Release the two joint hooks g engaging the LED board with
the cassette door.
Q
Cassette mechanism assembly
Display board
P
Q
Headphone board
Fig.29
Front panel assembly
Cassette door
Fig.30
Cassette door holder
Fig.31
LED board
Hooks g
Fig.32
EJCT button
Cassette door
(No.22036)1-15