Main Features: Remote Unit; Before You Begin; Remote Unit Setup - Oregon Scientific BAR888 User Manual

MAIN FEATURES: REMOTE UNIT

1
2
8
1. LCD
Displays the current temperature monitored by the
remote unit
2. LED Indicator
Flashes when the remote unit transmits a reading
°C / °F Slide Switch
3.
Selects between Centigrade (°C) and Fahrenheit (°F)
4. RESET Button
Returns all settings to default values
5. Channel Selection Switch
Designates the remote unit Channel 1, 2, or 3
6. Battery Compartment
Accommodates two AAA-size batteries
7. Battery Door
8. Wall-Mount
Used to attached the remote unit to a wall
9. Removable Table Stand
For positioning the remote unit on a flat surface
BAR888 Eng New R0 OP
Black

BEFORE YOU BEGIN

Position the remote and main units within effective
transmission range which in usual circumstances, is
20 to 30 meters.
3
For best operation:
4
1. Assign different channels to different remote units.
5
2. Insert batteries for remote units before doing so
for the main unit.
6
3. Place the main unit as close as possible to the
remote unit. Reset the main unit after installing
batteries to ensure easier synchronization
between the transmission and reception of
7
signals.
NOTE
materials and where the main and remote units are
positioned. Try various set-ups for best result.
Though the remote units are weather proof, they
should be placed away from direct sunlight, rain, or
9
snow.

REMOTE UNIT SETUP

For best results, use lithium ion batteries in the
remote sensing unit if the outdoor temperature falls
below -5 °C (41 °F), other battery types will not function
at such low temperatures.
NOTE
compartment, please remove it before installing the
batteries.
To install the batteries and change the channel:
1. Remove the screws on the battery compartment.
2. Select the channel number on the CHANNEL
slide switch.
Select the temperature display unit on the °C/°F
3.
slide switch.
4. Insert the batteries strictly according to the
polarities shown.
5. Replace the battery compartment door and secure
its screws.
6. Using a blunt stylus such as a paper clip, press
RESET.
3
3
The effective range is affected by the building
If there is a clear plastic tab in the battery
8/27/04, 6:39 PM