Table of Contents
Advertisement
4.1 Start A Web Browser Session
The Web Interface of WGSW-2403 is coded by Java Applet and running on the Java
Virtual Machine (JVM) version 1.3.1 platform. You should configure the management
station with an IP address and subnet mask compatible with WGSW-2403 for accessing
it. Also, the management station should be well configured and connected to Internet for
automatically downloading (upgrading) the suitable JVM through Internet from
http://java.sun.com. Or you can download from
http://java.sun.com/j2se/1.3/download.html and manually install it.
Note: Usually the newer Java
1.3.1 is strongly recommended to ensure properly operation.
The default network configurations are as follows:
IP: 192.168.0.1
Subnet Mask:255.255.255.0
Default Gateway: 192.168.0.254
1. Activate a web browser and enter the IP address you have configured in the address
field. A screen pops up and asks for username/password. Use system default users
name "admin" and password "admin" (If you have configured a new password, input
the new password) to access WGSW-2403.
2. After Login, the web management will start to download the java file for the switch.
3. After the file download is completed, the following message is shown. Please click
"Continue" to enter the stack main page.
CHAPTER 4 WEB MANAGEMENT
TM
Virtual Machine is not backward compatible. JVM version
- 15 -
TM
Advertisement
Table of Contents
