This section provides detailed information on how to remove or install the components from your computer.
Recommended tools
The procedures in this document require the following tools:
•
Phillips #0 screwdriver
•
Phillips #1 screwdriver
•
Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
SIM tray
Removing the SIM tray (WWAN models)
1
Follow the procedure
Before working inside your computer
2
Insert the tip of a paperclip into the hole of the SIM tray slot and then pull out and remove the SIM tray [1].
Installing the SIM tray (WWAN models)
1
Align and push the SIM tray back into the SIM tray slot.
2
Follow the procedure in
After working inside your computer
10
Removing and installing components
Removing and installing components
3