Advertisement
Trace the triangle below on a sheet of paper, then cut out the triangle
and use as a template on thick paper or poster-board.
1. Tape this edge to paper tube or straight edge.
2. Sight through tube or top of straight edge for
clear view of sky.
This edge must be kept horizontal at the mounting location
Optional Accessories
SRS-1
SRS-2
SRS-3
SRC-35
SRC-50
SRC-90
SRC-135
SM-32
The length of the cable run from the antenna to the satellite radio receiver can be
extended by using one of the optional cable kits listed above. Note: These cables
replace the 25' cable supplied with the antenna, and must be used as supplied. They
cannot be lengthened, shortened, or connected together as extensions.
6111 Shakespeare Rd., Columbia, SC 29223 · 803-227-1590 · Fax: 803-419-3099
"Sirius" and related marks are trademarks of Sirius Satellite Radio, Inc.
Satellite Shooter Template
This corner should be next to the mounting hole
when scanning.
DC Voltage Splitter for antenna cables up to 50'
DC Voltage Splitter for antenna cables over 50'
Connects two Sirius receivers to one Galaxy Satellite Antenna
35' RG-58 cable kit with connectors
50' RG-58 cable kit with connectors
90' RG-8X cable kit with connectors
135' RG-8X cable kit with connectors and inline amplifier
Low-Profile Surface Mounting Kit for locations without access
under the antenna for attaching nuts and bolts.
Electronic Products Group
www.shakespeare-marine.com
rev. 10-19-2006
Advertisement
