Sirius Satellite Radio Galaxy style Manual

Thank you for choosing a Shakespeare product.
Shakespeare works hard to build reliability and durability
into all of its products for maximum customer satisfaction.
Customer comments are welcome. Before installing, please
study the diagram and check parts supplied against those listed.
IMPORTANT: Please read all instructions before installing.
The Shakespeare Galaxy
is a versatile antenna for receiving Sirius Satellite Radio. The
antenna's versatile mounting permits attaching the antenna directly
to a flat surface, or to the Style SM-32 Surface Mount Kit, which is
supplied with some versions of the SRA-25, enabling the antenna
to be mounted with or without its coax cable passing through the
mounting surface and with or without access to the area underneath
it. In all cases, a receiver capable of receiving Sirius Satellite Radio
is required (not supplied).
Supplied parts (all versions):
(1) SRA-25 Antenna with 6" cable and TNC Female connector
(1) 25' Coax Cable with TNC Male and SMB connectors
(1) Bag containing: (1) Extension shaft, (1) Lockwasher, (1) Retaining nut
This instruction sheet
Some versions may also include the following supplied parts:
(1) Surface Mounting Base
(1) Mounting Gasket with slot for passing the coax cable
(4) Self-tapping stainless steel mounting screws
Tools required: Screwdriver. Marking pencil, drill and drill bits (9/16",
7/64"), needle nose pliers, or other tools appropriate to your specific application
may also be needed.
Required materials: Silicone Sealer (RTV) when flush mounting
DO NOT CUT OR ALTER THE ANTENNA CABLE.
Style SRA-25 Satellite Radio Antenna
®
DO NOT REMOVE ITS CONNECTOR.
Galaxy
Style SRA-25
®