Editing Fortianalyzer Reports; Printing Your Fortianalyzer Report - Fortinet Fortigate-5000 series Administration Manual

Log&Report

Editing FortiAnalyzer reports

1
2
3
4

Printing your FortiAnalyzer report

1
2
3
4
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102
After a scheduled FortiAnalyzer report is configured and generated, you can then
edit the report from the Report Config menu. The FortiAnalyzer tab enables you to
edit the report, and view information about other scheduled FortiAnalyzer reports.
You can view and edit scheduled reports from the FortiAnalyzer tab. You can also
edit the default FortiAnalyzer report that the FortiAnalyzer unit automatically
generates for your FortiGate unit.
After enabling the multi-report command from the CLI, the FortiAnalyzer
page displays if there is a report currently being generated by the FortiAnalyzer
unit, when the next scheduled report will be generated, and if the Report Engine is
active or inactive.
To edit a scheduled or default FortiAnalyzer report
Go to Log&Report > Report Config > FortiAnalyzer.
Select the Edit icon beside a report if you are not editing the default FortiAnalyzer
report.
Edit the settings you want for the scheduled report.
Select OK.
After the FortiAnalyzer unit generates the report, you may want to print the report
to have as a hardcopy reference or for a presentation. You can print your report(s)
from the web-based manager in the Report Access menu.
To print a FortiAnalyzer report
Go to Log&Report > Report Access > FortiAnalyzer.
Select Historical Reports.
In the list of FortiAnalyzer reports, select the report you want to print.
Select Print.
Note: Make sure to check the Report Title of the report displayed on the FortiAnalyzer page
before printing.
Reports
437