Fortinet Fortigate-5000 series Administration Manual page 427

Log&Report
3
4
5
6
7
FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102
SMTP user Enter the user name for logging on to the SMTP server to send alert
email messages. You only need to do this if you have enabled the
SMTP authentication.
Password Enter the password for logging on to the SMTP server to send alert
email. You only need to do this if you selected SMTP authentication.
Select Test Connectivity to receive a test email message to the email account you
configured in the above step.
Select Send alert email for the following if you require sending an email based on
one or all of the following:
Interval Time Enter the number of minutes before an alert email is sent to the
recipient.
Intrusion detected Select if you require an alert email message based on intrusion
detection.
Virus detected Select if you require an alert email message based on virus
detection.
Web access blocked Select if you require an alert email message based on blocked
web sites that were accessed.
HA status changes Select if you require an alert email message based on HA status
changes.
Violation traffic Select if you require an alert email message based on violated
traffic the FortiGate unit detects.
detected
Firewall Select if you require an alert email message based on firewall
authentication.
authentication device
SSL VPN login failure Select if you require an alert email message based on any SSL
VPN logins that failed.
Administrator Select if you require an alert email message based on whether the
administrator(s) logs in and logs out.
login/logout
IPSec tunnel errors Select if you require an alert email message based on whether
there is an error in the IPSec tunnel configuration.
L2TP/PPTP/PPPoE Select if you require an alert email message based on errors that
occurred in L2TP, PPTP, or PPPoE.
errors
Configuration Select if you require an alert email message based on any
changes made to the FortiGate configuration.
changes
FDS license expiry Enter the number of days for notification of FDS license expiry
time.
time (in days)
Disk usage in Enter a number for the percentage of disk usage that an alert
email will be sent.
percent
FortiGuard log disk Select if you require an alert email message based on the
FortiGuard Log & Analysis log disk quota.
quota
Select Send an alert based on severity if you require sending an alert email based
on log severity level.
This enables the FortiGate unit to send an alert email whenever a specific log
level appears in the log.
Select the minimum severity level in the Minimum severity level list.
Select Apply.
Note: The default minimum log severity level is Alert. If the FortiGate unit collects more
than one log message before an interval is reached, the FortiGate unit combines the
messages and sends out one alert email.
Alert Email
427