Category Block Cli Configuration; Fortiguard-Web Filter Reports - Fortinet Fortigate-5000 series Administration Manual

Web Filter

Category block CLI configuration

FortiGuard-Web Filter reports

FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102
Figure 256:New Local Rating
URL Enter the URL to be rated.
Category Name Select the blue arrow to expand the category.
Enable Filter Select to enable the filter for the category or the individual sub-
category.
Classification Name The classifications that can be filtered.
Enable Filter Select to enable the classification filter.
Use the hostname keyword for the webfilter fortiguard command to
change the default host name (URL) for the FortiGuard-Web Service Point. The
FortiGuard-Web Service Point name cannot be changed using the web-based
manager. Configure all FortiGuard-Web settings using the CLI. For more
information, see the FortiGate CLI Reference
fortiguard keywords.
Note: FortiGuard Web Filter reports are only available on FortiGate units with a hard disk.
Generate a text and pie chart format report on FortiGuard-Web Filtering for any
protection profile. The FortiGate unit maintains statistics for allowed, blocked, and
monitored web pages for each category. View reports for a range of hours or days,
or view a complete report of all activity.
To create a web filter report
• Go to Web Filter > FortiGuard-Web Filter > Reports.
FortiGuard - Web Filter
for descriptions of the webfilter
379