Manual by source menu, Auto by Smart Detection.
Default is "On" , the down/up move of electronic screen will be
related with power on/off of Projector.
DC 5V Out
Default is "On". Choose "Off" to Disable DC 5V OUT connection.
5V/1.5A power output if MHL source is not detected.
Warning!The DC 5V Out may happen power conflict if connecting
to PC and result in electric shock and/or injury.
VGA OUT (Standby)
Default is "Off". Choose "On" to enable VGA OUT connection.
Default is "Off" to disable this function. Choose "On" to enable
test pattern for installation.
Default is "Off". Choose "On" to enable LAN control under
Identify IP address.
Identify Mask address.
Reset LAN function.
Display the projector information for Model Name, Input Source,
Signal Type, Display Mode, Software Version and QR code on the
Scan QR code linking to Acer projector portal via mobile.
Press the "ENTER" button and choose "Yes" to return the
parameters on all menus to the factory default settings.
Note: Functions vary depending on model definition.