Table of Contents
Advertisement
7- MIDI
TherapSid can transmit and receive MIDI. A little dot at the right of the first LED
digit indicates incoming MIDI, a dot at the right of the second LED digit
indicates outgoing MIDI
7- 1 MIDI Channel Selection
TherapSid can receive and send MIDI on the channel of your choice.
You can individually change the input and output channels at any time by
following these steps:
-To select MIDI input channel: Hold Arp Mode and press Preset Up
Now the input channel is displayed on the led display.
Change the MIDI input channel (1-16) with the Preset Up/Down buttons
When done, confirm with a final press of the Arp Mode button. Display goes
blank and the channel is saved to EEPROM
-To select MIDI output channel: Hold Arp Mode and press Preset Down
Now the input channel is displayed on the led display.
Change the MIDI output channel (1-16) with the Preset Up/Down buttons
When done, confirm with a final press of the Arp Mode button. Display goes
blank and the channel is saved to EEPROM
7- 2 MIDI Preset Management
You can transfer all presets to and from a computer via MIDI System Exclusive
(SYSEX) transfers. This is handy to back up or share your presets with fellow
TherapSid owners.
To transmit (dump) SYSEX:
Hold Preset Down during startup. The SYSEX is automatically sent out of the
MIDI port.
To receive SYSEX:
Hold Preset Up during startup. TherapSid will enter SYSEX receive mode,
indicated Re on the LED display panel.
You can now send the SYSEX you previously dumped to therapSid.
At the end of the transfer, the Eeprom will be updated. This takes around 13
seconds. The progress % is indicated 0-99 on the LED Display.
12 of 18
Advertisement
Table of Contents
