Playing Audio Using Play-Fi; Controlling Multiple Speakers - MartinLogan Cadence User Manual

your soundbar is plugged in, the Wi-Fi Status
LED will start pulsing slowly. If the soundbar
is already configured to connect to a Wi-Fi
network, the LED will turn solid (connected) or
blink rapidly (not connected).
3. Once the Wi-Fi Status LED starts pulsing slowly,
your soundbar is in Access Point Mode and
ready to connect to your wireless network.
Note: If the Wi-Fi Status LED does not pulse
slowly, press and hold the Wi-Fi Setup button
for 8 seconds. You will hear two tones—one at
3 seconds and another at 8 seconds. You can
also choose "Wireless Setup > From Play-Fi
App" from the soundbar menu to enter Access
Point Mode. After 20 seconds, the Wi-Fi
Status LED will begin pulsing slowly to indicate
Access Point mode is ready. At anytime you
can press the button again to cancel the setup
mode.
4. Ensure that Wi-fi is enabled on your computer.
Go to your computer's Wi-Fi setup. Select the
Wi-Fi network with "Play-Fi " in the name.
5. Once your soundbar is selected as the Wi-
Fi network, open your web browser and type
P A
LAYING UDIO
Note: Future updates to the DTS Play-Fi application
may change functionality.
1. Launch the DTS Play-Fi app on your mobile
device or PC (located in the system tray).
2. Android and iOS Device Users: Within the
Play-Fi app, select your music source. You can
choose from your personal music library, Internet
Radio, or from select internet music services. PC
Users: Any audio content from your computer
can be streamed using Play-Fi.
34
U P -F
SING LAY I
http://192.168.0.1/index.html in the address
bar. You will see a web page from your
soundbar.
6. Click on 'Set Up'. A list of wireless networks will
be displayed. Click on the wireless network
you wish to connect to.
7. Enter the password for your wireless network
then click 'Next'.
8. Enter a name for your soundbar and then
click 'Next' to connect your soundbar to your
network.
9. Your soundbar will attempt to connect to your
network. Once the Wi-Fi Status LED turns solid
(not blinking), this indicates your soundbar is
connected to your wireless network. If the Wi-
Fi Status LED rapidly blinks, setup failed and
should be tried again.
10. Connect your Mac or PC to the same
network as your soundbar. Open your music
application, press the AirPlay icon, and choose
your speaker from the list.
3. If you have more than one Play-Fi
connected to your network, you will be prompted
to select the speaker to which you want to stream.

CONTROLLING MULTIPLE SPEAKERS

If you have more than one Play-Fi speaker connect-
ed to your network, you can simultaneously stream
the same audio to multiple speakers.
1. Android and iOS Device Users: Within the
app, press the Play-Fi logo in the lower corner
® speaker