8.6.
System
The "System" allows users to setup the IP Camera's parameters, like camera name, data/time
setting. And also provide firmware upgrade and reset tools at this page.
System
Camera Name
Password
Confirm Password
Set Date/Time manually
and Synchronize to PC
time
NTP Server (Radio Box)
Time Zone
NTP Server
(Example on ICA-107W)
The default camera name is "ICA-107(W / P)". It is recommended
to name a meaningful name for the IP Camera.
Enter the password for the default account. The password should
be 4 digits.
Enter the password again to confirm the setting.
You can set the IP Camera's Date/Time manually. Or you can
just click on the Synchronize to PC time to let the IP Camera
synchronize its time to your PC automatically.
To enable the NTP function.
Select the time zone where your camera is located.
Specify the IP Address of the NTP Server here.
64