Camera Status; Control Buttons - Planet Web Camera ICA-107P User Manual

7.3.

Camera Status

Above the Number button, there are status bars that will indicate the different status of the IP
Camera. Please refer to the table below to check the status of your IP Camera.
Camera Status
Yellow
Blue
Pink
Red
7.4.

Control Buttons

Control Buttons
Play
Stop
Pause
The channel has not been configured yet.
The IP Camera is connected and playing the live video.
The IP Camera is not connected now.
The IP Camera is recording.
Snapshot
Stop
Record
In Display mode, clicking on the "Play" button, the IP Camera
Viewer will connect to the disconnected IP Camera. In Playback
mode, clicking on the "Play" can play the video.
In the Display mode, clicking on the "Stop" button, the IP Camera
Viewer will disconnect the IP Camera. In the playback mode,
clicking on the "Stop" can stop playing the video.
Clicking on the "Pause" button, the IP Camera Viewer will pause
the current video display. You might use the "Play" button to
35
Pause
End the IP Camera
Viewer
Minimize the Window
Play Forward