Installation - Planet Internet Camera ICA-500 User Manual

Installation

1. Mount the Camera on the supplied Base and Stand.
Use 4 screws to fix the ICA-500 onto the ceiling as below. You can also put the
Network Camera on the table directly.
2. Connect the LAN Cable
Connect the ICA-500 to a 10/100BaseT hub or switch.
3. Connect power adapter
Connect the external power supply to the DC power connector attached on the
extension cable from the Network Camera. Note: use the power adapter, 12VDC,
included in the package and connect the other end to wall outlet for AC power.
4. Power Up
Connect the supplied power adapter to the ICA-500 and power up. Use only the
power adapter provided. Using a different one may cause hardware damage.
5. Check the LEDs
•
When powering on machine, the status LED will turn green. It means the system
is booting up successfully. Furthermore, if you have a proper network connection,
and access to the ICA-500, the 10/100M LAN LED will flash orange
ICA-500 Installation
6