Table of Contents
Advertisement
Power & LAN LED (green color)
This LED is used to indicate whether DC power is on or not. In addition, this LED
will be flashing while network accessing via Ethernet.
DI/DO Connector
The Camera provides a terminal block with 4 pins of connectors for DI and DO.
Please refer to the Appendix B in this manual for more information.
External Microphone
The Camera also supports external microphone. User can plug in an external
microphone to pick up voice more.
2.2.3 Installation Steps
1. Attach the Camera with the included stand
2. Fix camera to desired location with stand
3. Plug an Ethernet cable into the Camera
Connect an Ethernet cable to the LAN socket located on the camera's rear and
attach it to the network.
4. Connect the external power supply to Camera
Connect the attached power adapter to the DC power jack of the camera. Note:
Use the power adapter, 12VDC, included in the package and connect it to wall
outlet for AC power.
Once you have installed the camera well and powered it on, the power LED will
turn on. It means the system is booting up successfully. Furthermore, if you
have a proper network connection, and access to the camera, the LED will flash
green under wired mode.
5. Done
Advertisement
Table of Contents
