Alarm Function - AEG KRC 4368 DAB+ Instruction Manual

• Backlight: Set the intensity of the display illumination
during operation. The following options exist: High,
medium, low.
• Inactive Standby: Here you can set the time after which
the device turns off automatically. The device switches to
standby if no button is pressed during the selected time.
The following options exist: 2, 4, 5, or 6 hours. The option
"OFF" deactivates this function.
• Language: Change the OSD language.
• Factory reset: Select the "YES" command if you want to
reset the device again to the factory defaults. All settings
which you have made will be lost.
• SW version: Here, you can display the Software Version
of the device.

Alarm function

You can set the device in such a way that it switches on at a
specific time. You have the option of setting two alarm times.
You can also use this function to switch to another radio
station at a specific time.
• The alarm function can only be set if the unit is switched
on.
• To select an option, press the SKIP + / SKIP – buttons (5 / 6).
• Confirm your selection with the SCAN / SELECT button
(4).
Setting the alarm time
Keep the ALARM / SNOOZE button pressed
- 1x = to set the first alarm time
- 2x = to set the second alarm time
The instructions for setting alarm time 1 are given below
1. "ALARM 1 SETUP" appears on the display.
2. Press the SCAN / SELECT button. "ALARM 1 WIZARD"
appears on the display and the hours for the switch-on
time flash.
3. Now set the alarm time.
4. DURATION: Set the time, after which the device will
switch off automatically.
5. SOURCE: Select a source by which you want to be
awakened. Select from: BUZZER (beep), DAB, FM.
5a If DAB or FM has been selected, now select the desired
radio station which should play when the set alarm time
is reached. You choose from "LAST LISTENED" and the
preset stations.
6. Select the time at which the alarm time needs to be
activated. Select from: DAILY, ONCE, WEEKENDS,
WEEKDAYS.
6a If ONCE is selected, now set the date at which you want
to be awakened.
7. Finally select the volume at which you want to be awak-
ened. The lowest volume is indicated by four blocks.
8. Activate the alarm time by selecting "ALARM ON".
After you have made all your settings, the message "ALARM
KRC4368DAB+_IM
SAVED" briefly appears. The activated alarm function is
shown with the symbol " 1 /
NOTE:
The activated function cannot be shown on the standby
display for technical reasons.
Turn off the alarm signal
Press the button (8) to stop the alarm signal. The message
"ALARM OFF" appears briefly on the display.
Snooze
The automatically set alarm function can be switched off for
5 minutes with the ALARM / SNOOZE button.
NOTE:
If the Snooze function is activated, the time until the next
alarm is shown on the display.
Deactivate alarm function
1. Switch the device to standby.
2. Press the ALARM / SNOOZE button for approx. 2 sec-
onds. The two alarm times appear on the display one
above the other. For example: „ALARM 1 : ON" and
„ALARM 2 : OFF".
3. Now you can activate or deactivate the alarm times with
the button SKIP +.
ALARM 1 : OFF ALARM 1 : ON ALARM 1 : OFF
ALARM 2 : ON ALARM 2 : ON ALARM 2 : OFF
4. Press the SCAN / SELECT button to save your selection.
The display briefly shows the message "ALARM SAVED".
NOTE:
If you do not confirm your selection with the SCAN /
SELECT button, the message "ALARM NOT SAVED" is
briefly shown on the display.
Short-time Timer
You can use this function for example to get an overview of a
certain cooking time. You can select from 1 to 99 minutes.
1. Press TIMER / SLEEP button (14). The display shows
"Egg timer 00 : 00".
2. Set the desired time with the s SKIP + / SKIP – button.
3. Press the button SCAN / SELECT to activate the function.
The display shows "T" and the remaining time at top
right.
A beep can be heard when the set time has elapsed. Press
the INFO / MENU button to stop the beep.
Deactivate the short-time timer ahead of time
To stop the function ahead of time, proceed as described
above and select 00 : 00. Confirm with the button SCAN /
SELECT.
English
45
2" during operation.
17.12.15