Preparing The Remote Control - Xomax XM-DTSB1010 Installation Manual

Remote Control

Preparing the Remote Control

Inserting the Battery
1.First push to inside as the direction indicated by the arrow (See
Remove the battery holder as the direction indicated by the arrow (See
2.Replace the battery Set a new battery property with (+)side up as illustrated
).
(See
3
3.Insert the battery holder. Push in the holder to the original position (See
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About
Note :
The lithium cell in the battery compartment of remote control has been secured for
plastic
transport with a
remote control is ready for operation .
Changing of the view angle on multi-angle Digital Video media.
30 degree in each the direction of the front of the IR mark.
. Before initial use please remove this plastic so that the
-
11
1 ) and then
).
2
4
).